5083 O H111 Sheet & Plate Grade - Aluminium - Righton Blackburns

Range

Plate can be cut to customer requirements. Please contact your local Service Centre for further details.

4000 x 2000 & 6000 x 2000 plates are 3.2 certified to:

LRS
DNV
BV
ABS

Sheet Size	Sheet Thicknesses	Plate Thickness
2000 x 1000	2.0mm - 3.0mm
2500 x 1250	1.5mm - 8.0mm	4.0mm - 25.0mm
3000 x 1500	2.0mm - 6.0mm
3020 x 1520	12.0mm - 15.0mm
2500 x 1250	1.5mm - 8.0mm
4000 x 2000		3.0mm - 25.0mm
6000 x 2000		3.0mm - 40.0mm

If you do not see what you are looking for, please contact your local service centre with your specific requirements.

Related Specifications

Alloy 5083 corresponds to the following standard designations and specifications but may not be a direct equivalent: :

GM41
A95083
AlMG4.5Mn
Al Mg4.5 Mn0.7

Temper Types

The most common tempers for 5083 aluminium are:

O
H111
H32

Properties

Chemical Composition

Mechanical Properties

General Physical Properties

Applications

Shipbuilding
Rail cars
Vehicle bodies
Tip truck bodies
Mine skips and cages
Pressure vessels

Characteristics

Exceptional strength after welding
Exceptional performance in extreme environments
Not recommended for use in temperatures above 65^oC
Marine grade aluminium alloy

Additional Information

Weldability

Find your local Service Centre

Experienced multi-product specialists
In-house state of the art processing facilities
Large fleet of bespoke delivery vehicles

RBL Truck Retouched

RBL Truck Retouched

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed S online) and manufacturers' data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Material supplied by the Company may vary significantly from this data but will conform to all relevant and applicable standards. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied. Advice given by the Company to any third party is given for that party's assistance only and without liability on the part of the Company. All transactions are subject to the Company's current Conditions of Sale. The extent of the Company's liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.