Equinox produces stainless steel flat bar to the tolerances below. This information is taken from BS EN 10058.
Special tolerances are available upon request.
Thickness Tolerances
| Nominal Thickness (mm) | Tolerance (mm) |
|---|---|
≤ 20 | +/- 0.5 |
>20 and ≤40 | +/- 1.0 |
>40 and ≤60 | +/- 0.8 |
Width Tolerances
| Nominal Width (mm) | Tolerance (mm) |
|---|---|
10 and ≤40 | +/- 0.75 |
40 and ≤80 | +/- 1.0 |
80 and ≤100 | +/- 1.5 |
100 and ≤120 | +/- 2.0 |
120 and ≤ 150 | +/- 2.5 |
Straightness Tolerances
| Nominal Cross Section ?(mm2) | Tolerance (mm) |
|---|---|
Below 1000 | Below 0.4% of measuring length |
1000 and above | Below 0.25% of measuring length |
Out of Section Tolerances
| Nominal Thickness (mm) | Tolerance (mm) |
|---|---|
10 and ≤25 | 0.5 |
25 and ≤40 | 1.0 |
40 and ≤ 80 | 1.5 |
