Material Features
- Good corrosion resistance
- Good tensile strength
- Fatigue resistance
AMPLUS+ IN718 metal powders have been specifically designed and optimised for use in Additive Manufacturing (AM).
AMPLUS+ IN718 metal powders are widely used and successfully proven in AM.
AMPLUS+ IN718 processes well across the broad spectrum of AM machines and technologies due to their excellent fusion and melting characteristics in PBF and EBM applications.
AMPLUS+ IN718 is a nickel superalloy that offers good fatigue resistance at high temperatures. Often used in aerospace and oil and gas sectors, AMPLUS+ IN718 delivers excellent tensile strength.
Our Nickel alloy powder is available to purchase in 10kg security sealed containers or alternatively in 50kg drums.
Particle sizes available: |
---|
15-45 µm (PBF) |
20-53 µm (PBF) |
45-150 µm (DED) |
45-106 µm (EBM) |
HIP minimum requirements of 100 MPa at 1141OC for 4 hours. Note: part size will impact the aging time required. Follow with solution annealing or precipitation heat treatment to suit application. Further information on heat treatment and stress relieving can be provided by our technical experts by contacting: sales@rbpowdermetals.co.uk
LSD | d10, d50, d90 reported |
Apparent Density | Measured and reported |
Flow | Measured and reported |
Density | 8.19 g/cm3 |
Thermal Conductivity | 6.5 W/mK |
Melting Point | 1370°C - 1440°C |
Coefficient of thermal expansion | 13 10-6 K-1 |
Part No. | AMPLUS+ IN718 A |
PSD | 15 - 45μm |
Application | PBF |
Part No. | AMPLUS+ IN718 B |
PSD | 20 - 53μm |
Application | PBF |
Part No. | AMPLUS+ IN718 D |
PSD | 45 - 150μm |
Application | DED |
Part No. | AMPLUS+ IN718 E |
PSD | 45 - 106μm |
Application | EBM |
Fe | Bal |
---|---|
Ni | 50 - 55 |
Cr | 17 - 21 |
Nb+Ta | 4.75 - 5.5 |
Mo | 2.8 - 3.3 |
Ti | 0.65 - 1.15 |
Co | 1.0 |
Al | 0.2 - 0.8 |
Mn | 0.35 |
Si | 0.35 |
Cu | 0.3 |
C | 0.08 |
N | ≤0.03 |
O | ≤0.03 |
Nominal WT% |