Material Features
- Good strength throughout wider temperature range
- Good toughness
- Corrosion resistance
AMPLUS+ IN625 metal powders have been specifically designed and optimised for use in Additive Manufacturing (AM).
AMPLUS+ IN625 metal powders are widely used and successfully proven in AM.
AMPLUS+ IN625 processes well across the broad spectrum of AM machines and technologies due to their excellent fusion and melting characteristics in PBF and EBM applications.
AMPLUS+ IN625 is a nickel superalloy which offers good strength and toughness throughout a wide temperature range. Often used in high temperature, high corrosion applications, AMPLUS+ IN625 delivers excellent fatigue strength.
Our Nickel alloy powder is available to purchase in 10kg security sealed containers or alternatively in 50kg drums.
Particle sizes available: |
---|
15-45 µm (PBF) |
20-53 µm (PBF) |
45-150 µm (DED) |
45-106 µm (EBM) |
HIP minimum requirements of 100 MPa at 1141°C for 4 hours. Note: part size will impact the aging time required. Further information on heat treatment and stress relieving can be provided by our technical experts by contacting: sales@rbpowdermetals.co.uk
LSD | d10, d50, d90 reported |
Apparent Density | Measured and reported |
Flow | Measured and reported |
Density | 8.44 g/cm3 |
Thermal Conductivity | 9.8 W/mK |
Melting Point | 1290°C - 1350°C |
Coefficient of thermal expansion | 12.8M 10-6 K-1 |
Part No. | AMPLUS+ IN625 A |
PSD | 15 - 45μm |
Application | PBF |
Part No. | AMPLUS+ IN625 B |
PSD | 20 - 53μm |
Application | PBF |
Part No. | AMPLUS+ IN625 D |
PSD | 45 - 150μm |
Application | DED |
Part No. | AMPLUS+ IN625 E |
PSD | 45 - 106μm |
Application | EBM |
Ni | bal |
---|---|
Cr | 20 - 23 |
Mo | 8 - 10 |
Fe | 5 |
Nb | 3.15 - 4.15 |
Co | 1.0 |
Mn | 0.5 |
Si | 0.5 |
Al | 0.4 |
Ti | 0.4 |
C | 0.1 |
O | ≤0.03 |
N | ≤0.02 |
P | ≤0.015 |
S | ≤0.015 |
Nominal WT% |